Monday, May 24, 2010

SculptCAD Rapid Artists exhibit at the RAPID 2010 Conference

Here are a few quick photos of the SCRA exhibit at the RAPID 2010 Conference. Nancy Hairston installed the show and then she and David VanNess gave a presentation about the SCRA project.

Admittedly these aren't the best photos, and the carpit does fight for your attention, but I think you can see that each work of art reflects a different approach to the project.

























Thursday, May 13, 2010

SculptCAD Rapid Artists Project, After the Flocking



These are two finished rapid prototyped sculptures nestled together. They were created using a 3D computer sculpting program. That file was then sent to a rapid prototype company where they were printed in a clear resin.

Back in the studio, I painted them with black lacquer and then flocked them with black flock (see previous postings). Each sculpture stands 10" X 11" X 9".


This is the view front the top.

And this view demonstrates how the black flocking absorbs the light, causing the sculpture to loose depth and become an abstract flat graphic. I really find this to be intriguing, and will probably explore this in more in other sculptures. You can see more photos on my Flicker site.

Wednesday, May 12, 2010

Spending Time with the Flocker


As stated in a previous posting, my sculpture for the SculptCAD Rapid Artist project had some issues with the surface clarity. So after considering various options I decided on black flocking. This of course changes the visual impact, but it still retains some of the depth distortion that a clear plastic would have. It also changes it from a feel of blown glass to soft and fleshy. 

I did a small project using flock a few weeks ago, but this is the first time I have done anything this big.  I first tried using the adhesive that Fowl Flocker sent me, which turned out to be a low quality acrylic paint that dried so quickly it was not usable on anything larger than a duck head. So I switched to Don Jer Suede-Tex adhesive. This worked much better.  Thankfully I have 3 sculptures to work with. By the time I got to the last one I was getting pretty good results. I was also covered in flocking.

Sunday, May 9, 2010

Curing the Surfaces


I now have three rapid prototype prints of my sculpture for the SculptCAD Rapid Artists Project. Even though they are printed, they are far from finished.

To start with, there are a few issues with the material they are printed with. The surfaces are sticky, and the sculptures which should be hollow, are filled with uncured liquid printing resin. I think the drain holes were not large enough, so the liquid could not run out before it started to congeal. The original design was counter balanced to allow for the extended neck, but since they are now more or less solid I have had to cut into the heads and remove the congealed printing resin and then patch them.

After clearing the surfaces with denatured alcohol, the sculptures spent 24 hours under UV lamps to speed up the curing of the resin inside and out (see photo). Unfortunately this process cause the resin to change color. When combined with the bubbles and patches, I don't think I have any option other than to paint them. I am thinking black flock.

Posted on Brad Ford Smith Blogspot

Tuesday, May 4, 2010

5X7 Art Splurge 2010 at Arthouse


May 13th makers the 11th annual 5X7 Arthouse fundraiser. This year they have 900 artists who have created at least one work of art that fits into the 5X7" formate. Here is the link to the participating artists, The page also includes links to the artist's websites.


Over the last few years formate themed shows ie: 8X12, 12X12, 20 X20... have become very common, but the Arthouse was one if not the first venue to use this theme, and if you have ever been to one of their 5X7 fundraisers you know that they have it down to a science.

White lacquer, black flocking, Persian blue acrylic

This will be my 9th year to be participate. Sadly I can't attend the Austin event on May 13th, so I'll have to wait until it rolls into Dallas.

Wednesday, April 21, 2010

Fresh From The Printers


SculptCAD held an impromptu open house to display the first round of artwork to come back from the printers. On the wall are 3D computer images by (L-R) Bert Scherarth - Buildings, and Column, Shane Pennington - Tree Top, Brad Ford Smith - Chicken Neck Johnson, 2 more by Bert - Column, Wreath, and Heather Gorham - Rabbit.


The sculptures for the most part were just unpacked, so the artists have not had the opportunity to physically work on them yet. What you are seeing is the equivalent of a cake that has just been pulled out of the oven. They still need to be frosted. (L-R B-F): Erica Larkin - Figurative Busts, Brad Ford Smith - Chicken Neck Johnson, David VanNess - Bull Elk, Katherine Batiste - Robotic Boy, Nancy Hairston - Organic Form, Heather Groham - the 2 Rabbits, Shawn Smith - French Horn Bees, Bert Scherbarth - buildings. 

Posted on Brad Ford Smith Blogspot

Tuesday, April 20, 2010

David Kirkpatrick finds One Massive 3D Printer

3D printer could build moon bases

On David Kirkpatrick's wonderful Word Press blog he has been posting a lot about the SculptCAD Rapid Artists Project and about rapid prototyping in general. In his resent post he links to a large scale 3D printer that is used to print buildings.