Privet Sculpture Project Construction Day 3

All the arches are in place, 12 in all, spanning 40 feet. Sadly, the photographs really don't capture it very well at all.

I'll be out there early on Saturday, Open House 2-4 to add a few elements around the main arch.

These are the flying buttresses that were added for stability. The privet when freshly cut is very bendable. Only a few branches broke during construction. As the wood dries is becomes harder and more apt to brake and split. Over all the structure is very stable. I am expecting the wood to weather very well over it's year long existence. The bailing wire might be an issue with rust, so I'll beef that up on Saturday.

Privet Sculpture Project Construction Day 2

Despite the cold and rain, things are progressing. 4 1/2 of the 7 arches are in place. They need to be tweaked and fattened up a bit. I am also adding some side arches at the gate opening for stability.

The bundles are tied together with bailing wire, which was donated to the project by Susan Giller, an artist that is known to create strange bunny people with wire.

Privet does not have stickers in the normal definition of the word. What it has are numerous pointy bits along the branches that are the stubs of old dead twigs. These twigs can be very sharp.

A few days working at SculptCAD

I have been working with the Free Form program for a couple of days now, mostly focusing on making the duck that is part of the tutorial, but I have learned enough to generate this first 3 D model of my sculpture "Chicken Neck Johnson" for the SculptCAD Rapid Artists project. It still needs a lot of work before it is ready to be put through the 3 D printer.

At the End of the First Day of Construction on the Privet Sculpture Project

At the end of the first day of construction I learned that not all privet can be used the same. If the branch has any elbows it won't bend smoothly. The long shoots that grow straight up in one season are ideal for the ridged bundled arches that the PSP requires.

First Stake in the Ground for the Privet Sculpture Project

The structure will be staked to the ground using thick privet branches. It will be interesting to see what condition they are in after a year in the dirt. The dirt at this location is on about 10" deep then you hit lime stone, which is the reason this area is called Chalk Hill. The photo also shows some of the long privet branches that have been harvested to create the arched structure.

Location for the Privet Sculpture Project

The opening for Make Space: Installation at La Reunion TX is this Saturday, Feb. 27th. With all the rain and snow it has been hard for any of the artists to get out there, but I do have my sculpture sited now, and I have started the framing out of the structure. Above is the concept drawing superimposed at the site.

There has been some interesting issues around using privet as a building material, I'll blog about that later. Right now I need to get into my muddy boots and rain coat, pack up the truck and head out to La Reunion TX.

The Beam Plank & Flitch proposal for the Henderson Art Project

This is one of three Urban Timber Sculptures that Beam Plank And Flitch submitted to the Henderson Art Project. We focused on a minimalist approach that strikes a balance between the natural form and texture of the tree trunks and a graphic subtractive sculpture.